IBM Storage DS-Serie per SMcli abfragen - DS3400 DS4300 DS4700 DS5020
Aus znilwiki
Bevor es an die Überwachung einer DS3400 und DS4700 über Zabbix geht - hier erst einmal die Sammlung der Daten die wir bekommen können.
SMcli installieren
Nun, die SMcli.exe wird automatisch mit dem DS Storage Manager xx Client mitinstalliert. Ihr könnt also das ganze von dem Server/Rechner aus machen auf welchem dieser Installiert ist.
Im Installationsverzeichnis des Storage Managers, typischer Weise
C:\Program Files (x86)\IBM_DS\client
findet Ihr die SMcli.exe die sich aus einer DOS-Box etc. nutzen lässt.
Am besten fügt Ihr dann im Storage Manager eure Systeme hinzu so das ihr darüber auf diese zugreifen könnt - dann geht es auch mit SMcli.exe
Vorhandene Storage-Systeme ermitteln
Eine Liste aller Storage-Systeme die im Storage Manager verwaltet werden erhaltet Ihr mit
SMcli.exe -S -d -i -v
Beispielausgabe:
TEST_SAN1 192.168.170.38 192.168.170.39 Optimal TEST_SAN2 192.168.170.40 192.168.170.41 Optimal
Hier hätten wir also schon mal einen einfachen Punkt den Zustand abzufragen ("Optimal")
Controller abfragen
Wir wollen wissen was die Controller machen - dazu müssen wir nun gezielt ein Gerät angeben (IP's haben wir ja zuvor ermittelt):
SMcli.exe 192.168.170.38 -c "show allControllers summary;"
Beispielausgabe:
Performing syntax check...
Syntax check complete.
Executing script...
Controller in Enclosure 85, Slot A
Status: Online
Current configuration
Firmware version: 06.60.17.00
Appware version: 06.60.17.00
Bootware version: 06.60.17.00
NVSRAM version: N1814D470R960V05
Pending configuration
Firmware version: None
Appware version: None
Bootware version: None
NVSRAM version: None
Transferred on: None
Current ID (ALPA)
On drive channel 1: 125/0x1
On drive channel 2: 125/0x1
Replacement part number: 44X2423
Board ID: 3992
Submodel ID: 19
Product ID: 1814 FAStT
Product revision: 0916
Serial number: SN12345678
Date of manufacture: December 25, 2007
Vendor: IBM
Cache
Total data cache: 864 MB
Processor cache: 160 MB
Associated Logical Drives (* = Preferred Owner):
SAN_LD1*
Controller host name:
Remote login: Disabled
Ethernet port: 1
MAC address: 00:a0:ff:ff:ff:10
Network configuration: Static
IP address: 192.168.37.83
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Ethernet port: 2
MAC address: 00:a0:ff:ff:ff:11
Network configuration: Static
IP address: 192.168.170.38
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Controller in Enclosure 85, Slot B
Status: Online
Current configuration
Firmware version: 06.60.17.00
Appware version: 06.60.17.00
Bootware version: 06.60.17.00
NVSRAM version: N1814D470R960V05
Pending configuration
Firmware version: None
Appware version: None
Bootware version: None
NVSRAM version: None
Transferred on: None
Current ID (ALPA)
On drive channel 1: 124/0x2
On drive channel 2: 124/0x2
Replacement part number: 44X2423
Board ID: 3992
Submodel ID: 19
Product ID: 1814 FAStT
Product revision: 0916
Serial number: SN12345679
Date of manufacture: December 25, 2007
Vendor: IBM
Cache
Total data cache: 864 MB
Processor cache: 160 MB
Associated Logical Drives (* = Preferred Owner): None
Controller host name:
Remote login: Disabled
Ethernet port: 1
MAC address: 00:a0:ff:ff:ff:e8
Network configuration: Static
IP address: 192.168.37.84
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Ethernet port: 2
MAC address: 00:a0:ff:ff:ff:e9
Network configuration: Static
IP address: 192.168.170.39
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Script execution complete.
SMcli completed successfully.
Einzelnen Controller abfragen
Dazu müssen wir A oder B angeben:
SMcli.exe 10.106.170.38 -c "show Controller [A];"
Beispielausgabe:
Performing syntax check...
Syntax check complete.
Executing script...
Controller in Enclosure 85, Slot A
Status: Online
Current configuration
Firmware version: 06.60.17.00
Appware version: 06.60.17.00
Bootware version: 06.60.17.00
NVSRAM version: N1814D470R960V05
Pending configuration
Firmware version: None
Appware version: None
Bootware version: None
NVSRAM version: None
Transferred on: None
Current ID (ALPA)
On drive channel 1: 125/0x1
On drive channel 2: 125/0x1
Replacement part number: 44X2423
Board ID: 3992
Submodel ID: 19
Product ID: 1814 FAStT
Product revision: 0916
Serial number: SN75108922
Date of manufacture: December 25, 2007
Vendor: IBM
Cache
Total data cache: 864 MB
Processor cache: 160 MB
Associated Logical Drives (* = Preferred Owner):
SAN_LD1*
Controller host name:
Remote login: Disabled
Ethernet port: 1
MAC address: 00:a0:ff:ff:ff:10
Network configuration: Static
IP address: 192.168.37.83
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Ethernet port: 2
MAC address: 00:a0:ff:ff:ff:11
Network configuration: Static
IP address: 192.168.170.38
Subnet mask: 255.255.255.0
Gateway: 192.168.170.111
Drive interface: Fibre
Channel: 1
Current ID: 125/0x1
Maximum data rate: 4 Gbps
Current data rate: 4 Gbps
Data rate control: Switch
Link status: Up
Drive interface: Fibre
Channel: 2
Current ID: 125/0x1
Maximum data rate: 4 Gbps
Current data rate: 4 Gbps
Data rate control: Switch
Link status: Up
Host interface: Fibre
Channel: 1
Current ID: Not applicable/0xFFFFFFFF
Preferred ID: 0/0xEF
NL-Port ID: 0x010400
Maximum data rate: 4 Gbps
Current data rate: 4 Gbps
Data rate control: Auto
Link status: Up
Topology: Fabric Attach
World-wide port name: 20:04:00:ff:ff:ff:ff:11
World-wide node name: 20:04:00:ff:ff:ff:ff:10
Part type: HPFC-5700 revision 5
Host interface: Fibre
Channel: 2
Current ID: Not applicable/0xFFFFFFFF
Preferred ID: 1/0xE8
NL-Port ID: 0xFFFFFF
Maximum data rate: 4 Gbps
Current data rate: 4 Gbps
Data rate control: Auto
Link status: Down
Topology: Not Available
World-wide port name: 20:04:00:ff:ff:ff:ff:12
World-wide node name: 20:04:00:ff:ff:ff:ff:10
Part type: HPFC-5700 revision 5
Script execution complete.
SMcli completed successfully.
Alle Festplatten abfragen
Wieder mit IP des Storages:
SMcli.exe 192.168.170.38 -c "show allDrives summary;"
Beispielausgabe:
Performing syntax check...
Syntax check complete.
Executing script...
SUMMARY
Number of drives: 16
Current drive types: Fibre (16)
BASIC:
TRAY, SLOT STATUS CAPACITY CURRENT DATA RATE PRODUCT ID FIRMWARE VERSION
85, 1 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 2 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 3 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 4 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 5 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 6 Optimal 136.732 GB 4 Gbps ST3146954FC F B90A
85, 7 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 8 Optimal 136.732 GB 4 Gbps MAX3147FD F S708
85, 9 Optimal 136.732 GB 4 Gbps MBA3147FD F SD01
85, 10 Optimal 136.732 GB 4 Gbps MBA3147FD F SD01
85, 11 Optimal 136.732 GB 4 Gbps ST3146954FC F B90A
85, 12 Optimal 136.732 GB 4 Gbps MBA3147FD F SD01
85, 13 Optimal 136.732 GB 4 Gbps MBA3147FD F SD01
85, 14 Optimal 136.732 GB 4 Gbps MBA3147FD F SD01
85, 15 Optimal 136.732 GB 4 Gbps ST3146356FC F B989
85, 16 Optimal 136.732 GB 4 Gbps ST3146356FC F B989
DRIVE CHANNELS:
TRAY, SLOT PREFERRED CHANNEL REDUNDANT CHANNEL
85, 1 1 2
85, 2 2 1
85, 3 1 2
85, 4 2 1
85, 5 1 2
85, 6 2 1
85, 7 1 2
85, 8 2 1
85, 9 1 2
85, 10 2 1
85, 11 1 2
85, 12 2 1
85, 13 1 2
85, 14 2 1
85, 15 1 2
85, 16 2 1
Script execution complete.
SMcli completed successfully.
Einzelne Festplatte abfragen
Dazu müssen wir das Gehäuse ("Tray") und den Einschub ("Slot") angeben:
SMcli.exe 192.168.170.38 -c "show Drives [85,1];"
fragt im Gehäuse 85 die Festplatte im Slot 1 ab, Beispielausgabe:
Performing syntax check... Syntax check complete. Executing script... Drive at Enclosure 85, Slot 1 Status: Optimal Mode: Hot spare standby Raw capacity: 136.732 GB Usable capacity: 136.232 GB World-wide name: 50:00:00:e0:19:d2:f0:d0 Associated array: None PORT CHANNEL ID 0 1 0/0xEF 1 2 0/0xEF Drive path redundancy: OK Drive type: Fibre Channel Speed: 15000 RPM Current data rate: 4 Gbps Product ID: MAX3147FD F Firmware version: S708 Serial number: DV59P8205F1P Vendor: IBM-SSG Date of manufacture: Not Available Script execution complete. SMcli completed successfully.
LUNS abfragen
SMcli.exe 192.168.170.38 -c "show logicalDrives;"
Beispielausgabe:
Performing syntax check...
Syntax check complete.
Executing script...
STANDARD LOGICAL DRIVES------------------------------
SUMMARY
Number of standard logical drives: 1
See other Logical Drives sub-tabs for premium feature information.
NAME STATUS CAPACITY RAID LEVEL ARRAY
SAN_LD1 Optimal 1,907.246 GB 5 1
DETAILS
LOGICAL DRIVE NAME: SAN_LD1
Logical Drive status: Optimal
Capacity: 1,907.246 GB (2,047,890,018,304 Bytes)
Logical Drive ID: 60:0a:0b:80:00:42:13:10:00:00:07:18:4b:bc:99:a4
Subsystem ID (SSID): 0
Associated array: 1
RAID level: 5
Drive type: Fibre Channel
Enclosure loss protection: No
Preferred owner: Controller in slot A
Current owner: Controller in slot A
Segment size: 128 KB
Modification priority: High
Read cache: Enabled
Write cache: Enabled
Write cache without batteries: Disabled
Write cache with mirroring: Enabled
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch: Enabled
Enable background media scan: Enabled
Media scan with redundancy check: Disabled
MISSING LOGICAL DRIVES------------------------------
Number of missing logical drives: 0
Script execution complete.