Brocade-SAN-Switche Verfügbare Lizenzen anzeigen

Changelog:

• 12.02.2024 erste Version

---

ab Version 9.x

---

per CLI

Verbindet euch per SSH und tippt folgendes ein:

license --show -port

Beispielausgabe:

DS_6620B:FID128:admin> license --show -port
   48 SFP-based ports are available in this switch
   16 QSFP-based ports are available in this switch
   No Ports on Demand license is installed
   No Q-Flex Ports on Demand license is installed
     Dynamic POD method is in use

   24 SFP-based port assignments are provisioned for use in this switch:
        24 SFP-based port assignments are provisioned by the base switch allowance
    0 SFP-based ports are assigned to the base switch allowance or installed licenses:
         0 ports are assigned to the Ports on Demand base switch allowance
  SFP-based ports assigned to the base switch allowance:
     None
  SFP-based ports assigned to the Ports on Demand license:
     None
  SFP-based ports that are not assigned:
     0, 1, 2, 3, 4, 5, 6, 7, 8, 9
     10, 11, 12, 13, 14, 15, 16, 17, 18, 19
     20, 21, 22, 23, 24, 25, 26, 27, 28, 29
     30, 31, 32, 33, 34, 35, 36, 37, 38, 39
     40, 41, 42, 43, 44, 45, 46, 47
  24 license reservations are still available for use by unassigned ports

    0 QSFP-based port assignments are provisioned for use in this switch:
         0 QSFP-based port assignments are provisioned by the base switch allowance
    0 QSFP-based ports are assigned to the base switch allowance or installed licenses:
         0 ports are assigned to the Q-Flex Ports on Demand base switch allowance
  QSFP-based ports assigned to the base switch allowance:
     None
  QSFP-based ports assigned to the Q-Flex Ports on Demand license:
     None
  QSFP-based ports that are not assigned:
     48, 49, 50, 51, 52, 53, 54, 55, 56, 57
     58, 59, 60, 61, 62, 63
   0 license reservations are still available for use by unassigned ports

In diesem Beispiel also 24 Ports von denen 24 noch nicht vergeben sind.

---

Per GUI

---

Kommentare

Loading comments...